Given that storm windows are necessary due to high winds and the resulting dirt that can accumulate, it is important to understand that cleaning them can be challenging. For instance, you may find that taking a few extra minutes to remove and then thoroughly clean the different components of the storm windows is very beneficial to the overall process. As part of that, it is a good idea to be sure that you have chosen the most appropriate cleaning products for your needs and that all of the separate parts of the storm windows have been stored safely before being re-assembled. As a result, the following information will be quite helpful as you see to the safe and effective cleaning of your aluminum storm windows when they are exceptionally dirty.
Use The Right Product
It is not unusual to assume that a bit of elbow grease and any cleaner will give you the results that you need. Unfortunately, the truth is that if you use a cleaner, even an all-purpose product, you may find that you are working too hard and risking damage to the aluminum. Therefore, you should verify that you are using a scratch-resistant cleaning item that is both safe and effective for storm windows in an aluminum frame.
As part of that, a clean and soft rag should also be used in lieu of a more abrasive product that might damage the aluminum. By doing so, you are likely to find that cleaning the aluminum and its components is easier, safer, and less taxing. You will want to remember that aluminum can be damaged if you are not careful while cleaning.
Start Cleaning From The Inside Of Your House
Cleaning your aluminum storm windows is best accomplished by starting from the inside and working your way out. As part of that, you should plan ahead and designate a safe, soft, and hygienic place to lay the window sections when you are done cleaning and drying each one. That also means that if feasible, you should detach one piece at a time and start on one side, following the directions provided on your cleaner.
It is important to note that some products will require rinsing with clean water before proceeding to the next section. It may also behoove you to designate a box or other container to hold the smaller pieces of the storm windows to make reassembly easier later.
In conclusion, storm windows can quickly become clogged with dirt or mud, thus quickly rendering them unsuitable for their intended purpose. When that happens, it is a good idea to apply the information listed above. For more assistance, contact a company like Southern Glass & Mirror.